What a carpenter in Fulham can build for you
Most carpentry requests we get are about storage. Alcove cupboards with shelves above them either side of a chimney breast are the classic one in a Fulham terrace. Others include a run of shelves for books or records, a wardrobe built into a bedroom recess, a cupboard under the stairs, a window seat with storage inside, or boxing in ugly pipes so they can be painted to match the wall.
We also handle the finishing timber in a room: new skirting boards, architrave (the moulded trim around a door frame), window boards and shelves inside cupboards. Units are usually made from MDF for a painted finish or from timber where you want to see the grain.
We work in Fulham and across Parsons Green, Putney and Chelsea. Every job starts with measuring the space properly, because in an old house nothing is quite where the tape measure says it should be.
Alcoves, chimney breasts and wonky walls
Victorian and Edwardian rooms rarely have square corners. Alcove walls lean in or out, floors slope towards the bay and the chimney breast may bow in the middle. Off the shelf units leave gaps you can fit your fingers in.
As your carpenter in Fulham, we deal with this by scribing, which means marking the shape of the wall onto the edge of a panel and cutting it to follow the wall exactly. Skirting boards are either cut neatly around or removed and refitted to the front of the new unit. The result is a cupboard that looks as if it was always there.
Before building, have a think about what will live in the unit. Records, vinyl and big art books are heavy and need thicker shelves or shorter spans so they do not sag. A television, games console or router needs holes for cables and room for air to move.
Jobs we cover
- Alcove cupboards and shelves either side of a chimney breast
- Floating and bracket shelving
- Built in wardrobes in recesses
- Understairs cupboards and storage
- Window seats with storage
- Boxing in pipes
- Repairing and replacing skirting boards and architraves
- Refixing loose and sagging shelves
- Skirting boards, architrave and window boards
- Adjusting and repairing cupboard doors
- Adapting flat pack units to fit an alcove
Fixing to brick, lath and plaster or plasterboard
The wall behind a unit matters as much as the unit. Outside walls and chimney breasts in period terraces are usually solid brick under plaster. They hold fixings well once you get through the plaster, though very old soft bricks and crumbly mortar need the right plugs.
Internal walls in older houses are often timber studs (upright posts) covered with lath and plaster. Screws need to hit the studs, not just the plaster, or heavy shelves will pull away over time. In conversions and newer riverside flats, walls are usually plasterboard. Light shelves can go on good cavity fixings, but anything heavy should go into the studs or into extra timber fitted behind the board.
Before any drilling we check the wall with a detector for cables and pipes. Chimney breasts hide flues and sometimes old pipes, so we drill them with care.
Flats, mansion blocks and leasehold rules
If you own a leasehold flat, your lease says whether you need permission for alterations, as the gov.uk leasehold guide explains. A freestanding bookcase is not an alteration, but a built in wardrobe fixed to the walls might count, so check your lease or ask the managing agent before you commit.
Mansion blocks bring a practical problem: getting long boards up the stairs. Some lifts are too small for full length sheets of MDF, so we may cut parts to size elsewhere or build the unit in sections and join them in the room. Some blocks also set working hours for noisy jobs like cutting and drilling. Tell us about these when you ask for a quote.
Carpentry repairs: skirting, architraves, shelving and boxing in
Not every job is a new build. A lot of our work as a carpenter in Fulham is putting right the timber that is already there. Skirting boards come loose where the fixings behind them have failed, get split by knocks, or go missing in one stretch after a radiator or pipe has been moved. We refix loose lengths, cut out damaged pieces and fit new skirting to match the old profile as closely as we can.
Architraves take the same knocks around doors. A split or missing section is cut back to a neat joint, and a new piece is fitted and mitred at the corners. Where a door frame has moved, the architrave is often the first thing to show it, so we check the frame and the door at the same time.
Boxing in is another regular job for a handyman carpenter. Pipes running down a wall or along the skirting in a kitchen, bathroom or hallway can be hidden in a neat timber or MDF box and painted to match. We leave a removable panel wherever there is a valve, a joint or a stopcock, so it can still be reached. Loose or sagging shelves, inside cupboards or on the wall, can be refixed, given a stronger support or replaced.
What to have ready
Good information at the start means a more accurate quote and fewer surprises.
- Photos of the space, taken straight on and from the side
- Rough sizes: height, width and depth of the alcove or wall
- Pictures of units you like the look of
- Your choice of finish: painted, oiled or left ready for your own decorator
- A list of what the storage will hold, especially anything heavy
- Where sockets, switches and radiators sit on the wall
Common carpentry problems in older homes
Shelves that sag in the middle are the most common fault we see. The fix is usually a thicker shelf, a support in the middle or a hidden batten along the back. Cupboard doors that drift open or will not close often just need their hinges adjusted, which takes minutes.
Sockets and radiators sitting in the middle of an alcove can get in the way. We can build around a socket and leave access. Moving it is electrical work, so we plan that part as a separate electrical job. If a chimney breast wall is damp, that needs sorting before any unit goes against it, or the back panels will swell.
Carpentry or flat pack assembly?
This page is about storage built to measure on site. If you have bought flat pack furniture and just need it put together and fixed to the wall, our furniture assembly page covers that. As a handyman carpenter, we can also adapt flat pack units, for example by fitting them into an alcove and adding a scribed panel so they look built in.
Who this suits
- Owners of period terraces with empty alcoves
- Flat owners short of storage in conversions
- Families who need a cupboard under the stairs put to work
- Book and record collectors who need strong shelves
- Landlords who want sturdy storage in a rental
Common questions
Can you build alcove units to match ones I already have?
Usually, yes. Send photos of the existing units, especially the door style and any mouldings. We can match the proportions and profile closely, and once painted the old and new should sit happily together.
Do you supply the timber and MDF?
Yes, materials are normally bought for the job and included in the quote. If you want a particular timber or door style, say so at the start, as that affects the price and how long the job takes.
Can I paint the units myself?
Of course. Many people ask for the units to be left primed and ready, then paint them along with the room. Just tell us when you ask for a quote so we know where the job stops.
Will a floating shelf hold my books?
It can, but only with the right fixing into a solid wall or into the studs of a partition wall. On plasterboard alone, a floating shelf full of books is asking for trouble. We will tell you what the wall can take.
Do I need my freeholder's permission for built in storage?
It depends on your lease. The gov.uk leasehold guide says your lease tells you whether you need permission for alterations. A quick email to your managing agent before work starts can save a headache later.
Can you build around a socket or radiator?
Yes. Sockets can be left reachable through a cut out or a removable panel, and units can be shaped around radiator pipes. If a socket needs moving, we plan that part as a separate electrical job.
Can you just fit a few shelves rather than a full unit?
Yes. Simple shelving is a very common request. Tell us how many shelves, the wall they go on and what they will hold.
Are you a carpenter or a handyman?
Both. We are a local handyman in Fulham, and carpentry is a big part of what we do, from built in alcove units to small repairs on skirting, architraves and shelves. Tell us about the job and we will come back to you with a free quote.
Can you replace a damaged section of skirting board?
Yes. We cut out the damaged length and fit new skirting, matching the old profile as closely as we can. Some old profiles are no longer easy to find, so send a photo and we will tell you how close a match we can get.